How to Replace a Hyundai I10 Key Fob Battery

The Hyundai i10 is one of the most stylish little cars on the market. Its interior is better than rivals such as the Citroen C1, Volkswagen UP and SEAT Ibiza.

Hyundai's keyfob can do a lot for you. It can lock and unlock your vehicle remotely. It also comes with a key that is mechanical that you can use in the event the battery in the fob is dead.

Dead Coin Battery

Key fobs allow drivers to lock their cars and then start them without having to insert keys into the ignition. It works by sending radio frequency signals that communicate with the computer onboard of the vehicle.

The battery inside the keyfob controls the communication. It will eventually get worn out, and it will need to be replaced. Depending on the model of your Hyundai, it may or might not show an alert before the battery goes out. It is best to have a spare key fob around with you in order to quickly replace the battery when it is worn out.

The key fob should be reprogrammed for the vehicle once the new battery has been installed. This can be done using the Hyundai Digital Key app or an OBDII scanner, but it's more likely to be done at your Reno home. To do this, follow the instructions in your owner's manual or look on YouTube for "how to open and change a Hyundai key fob battery." Make sure to write down the old battery number or take a photograph of it prior to removing it.

After the key fob has been reprogrammed, it should begin working properly. If it doesn't work, you'll need to visit a dealership for a replacement or call a mobile locksmith. They'll have the knowledge and tools to fix it.

Water Damage

A key fob is a handy piece of technology that can allow you to lock your car from the comfort of your home, roll down the windows from the outside and even start the vehicle. But, it's not impervious to damage and will eventually get worn out due to normal usage. The replacement hyundai key fob process for the hyundai i10 remote key replacement i10 keyfob battery is fairly simple and affordable.

It's not uncommon to drop your key fob in an puddle, a pool or even a washing machine. It can be rescued if you act fast. Water isn't a great combination when it comes to electronics and a soaked key fob can cause a myriad of problems, including corrosion, short circuits and even complete failure.

The first thing to do is to try to get as many gallons of water out as you can. Shake out any visible moisture by flipping the fob. You may also be able to place it on top a radiator or use a hairdryer to accelerate the process. After you have removed all moisture you can, it's worth placing the fob somewhere warm and dry, where it will continue to dry for a couple of days.

Next, you should attempt to open up the fob and remove the battery. The majority of Hyundai key fobs that are i10 use the same battery that's used in a variety of quartz watches. They are very simple to replace. After you've replaced the battery, be sure to take a photograph or take notes of where the fob is placed before closing the fob.

Poor Battery Contact

It's possible that your keyfob's battery is drained. This is a frequent problem. Most often, the remote will show signs of trouble before it is completely destroyed. Check that the retainers are secure and don't have any rust on them. If they do, wash them using a proper battery cleaning solution and wire brush. Use a button cell battery that has the same voltage, size, and specification as the original.

It could be an indication that your alternator, the component that charges the battery when the engine is running, isn't working correctly. An alternator that is not working properly can drain the battery quickly and cause the warning light to come on.

A quick voltage check can assist you in determining whether this is the case with your Hyundai. If the battery is in good condition it's possible the issue is with the circuit board, or a different component of the key fob. You can access the key fob by pressing an aluminum tab or button on either the back or front of the unit. After you remove the cover, insert a new CR2032 battery, shop making sure that all connections are in contact.

Reprogramming

Hyundai provides keyless entry on many of its models. This makes cruising around Littleton and Parker, CO, easier than ever. You can use the remote to start your car, open the doors, and lock them. It's not impervious to damage and a broken or damaged fob can cause issues. If your Hyundai keyfob isn't working it is possible to reprogramme it so that it functions with your vehicle.

The first thing you need to do is take the battery off. The button cell battery is usually in a plastic tab. If you remove the tab and replace the battery, make sure to use the same size and voltage as your old battery.

After the battery has been replaced, close up the tab and replace the retaining clips. Test the key fob a second time to make sure it still works.

If your key fob not working, you might have to seek out a locksmith or dealer. A dealer or locksmith can cut a brand new key and remote for you, and can also program the key to work with your car. This service is usually cost-based, but it's worth it if you wish to keep your Hyundai key fob in good working order. They can also help you choose the right Hyundai key fob to meet your requirements.