Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires are a warm and comfortable form of warmth with no harmful gases or soot. They are simple to set up similar to an electrical fire.

The BARDA-funded contract supports development of the BioFire Emerging CoV Panel, which is a nucleic acid Amplification test to be used with BioFire FilmArray Systems to detect known and emerging human coronaviruses in nasopharyngeal or oropharyngeal sw and saliva samples.

Eco-friendly

Bioethanol is a green alternative for gas or wood. The fuel is made from plant by-products and utilizes an organic process to convert sugars into alcohol. bioethanol fire has numerous advantages over other types of fireplaces, including the absence of harmful emissions and a smaller carbon footprint. Bioethanol is a healthier alternative to other fires as it doesn't produce smoke or soot. It doesn't require a flue and can be used anywhere in the garden or at home.

Multi-drug resistant bacteria (MDR) are one of the most dangerous health threats of today. New testing methods can identify MDR bacteria early and avoid any further complications. One test that can help is the BioFire FilmArray multiplex PCR system. This test uses a symptom-driven approach to detect common pathogens that cause sepsis. The results are accessible within an hour so that providers can start treatment immediately.

Molecular PCR is a process that amplifies DNA or RNA molecules into millions to billions of copies. This allows you to analyze small samples of body fluid or tissue to determine the presence of specific genetic sequences. It is a useful tool for laboratory professionals, and helps them identify serious diseases in a quick and cost-effective manner. The BioFire film array PCR system is a revolutionary instrument for the diagnosis of infectious diseases. It can be utilized in many settings, including hospitals and laboratories.

If you are undergoing tests for respiratory problems, you can apply a swab of alcohol to your nose before sending it to the lab. BioFire's system allows doctors to react quickly and with a short turnaround time. This means that patients will enjoy better outcomes and will spend less time waiting for the results.

The Chanouf Farm-Biofire business has created an agroforestry waste recycling unit, which makes use of pear and olive tree waste to make organic charcoal and biomass energy. The products are offered to the general public to replace traditional coal briquettes and charcoal with eco-friendly alternatives. Additionally, these bio-waste products can be used to fuel the Kachelofen fireplace which produces radiant heat that is greener than gas and electric fires.

Clean burning

When you use a bio ethanol fuel fireplace (recent unclehope0.werite.net blog post) fire you aren't only saving energy, but you're also helping the environment by using a renewable fuel source. This is because the combustion of bioethanol doesn't produce any harmful gases such as carbon dioxide. Instead, it releases water vapour and heat. This makes it a safer and healthier alternative for indoor bio ethanol fire use.

Ethanol can be made by fermenting plant sugars. It is an energy source that is renewable. This means it can be made quickly and will not run out as fossil fuels such as coal and oil. Bioethanol helps reduce the dependency on foreign imports and reduces the risks associated with shortages in supply.

The bio-fires can be installed easily, and can be placed in existing fireplace openings or as standalone units. This makes them a great alternative to wood and gas fires. They are also a great choice for homes and offices without chimneys or flues.

When a bio-fire is lit, a specific media is installed in the burner that absorbs the liquid fuel ethanol while making it available for combustion. The recessed ethanol fireplace is burned by the flames and the vapours are emitted out into the atmosphere through the vent. This makes the flames appear more natural and gives a mesmerising beauty that can't be replicated using gas or real wood fires.

Bio-fires have the advantage of not needing a vent or flue to replenish oxygen used during combustion. They don't emit the carbon monoxide which is released into the air when gas fireplaces are open-fronted.

The BioFire Respiratory Panel utilizes multiplex technology that simultaneously tests for 19 respiratory pathogens in about an hour. This enables doctors to identify and rule out respiratory illnesses much faster than they can with conventional laboratory tests that require patients visits. Both patients and the health system benefit from this.

Safe indoors

Bio-fires are far safer to use indoors compared to real fires because they release no smoke or carcinogenic fumes. They also don't emit carbon monoxide, which could cause death if breathed in. However the bio-ethanol fuel is flammable and you must be careful when handling your burner and refuelling it. It should be filled only after the burner is switched off and the fire is cool, and any spills must be cleaned up immediately.

The diagnostics offered by the company's FilmArray systems--BioFire 2.0 and BioFire Torch are easy to use and run eight different commercially available US Food and Drug Administration approved diagnostic panels, three additional panels that have been cleared for use in emergency situations, and six environmental test panels. The tests include a respiratory panel that was developed to quickly detect and differentiate respiratory diseases such as COVID-19, emerging coronaviruses, and COVID-19.

The COVID-19 panel was awarded a grant by the Biomedical Advanced Research and Development Initiative (BARDI) which is part of the US Department of Defense's Strategic Access Program. The COVID-19 system is based on antigens, and allows clinicians to differentiate symptoms caused by COVID-19 from other respiratory infections. This test has similar level of accuracy to the rapid antigen tests that are currently being used.

Additionally, the company is developing an SARS-CoV-2 test for its Respiratory 2.1 Panel. The multiplexed nucleic acid amplifying assay will be made available for use on the BioFire FilmArray 2.0 and Torch Systems, and will detect SARS-CoV-2 as well as 21 other respiratory pathogens in nasopharyngeal and saliva samples in less than an hour. The test will be developed within the shortest timeframe and FDA approval for EUA and the 510(k) will be scheduled to be granted by Q3 2020.

While bio-ethanol flame-effect fireplaces are extremely safe to use, they should be kept away from any flammable material such as curtains, blankets and pillows. You should never place them near anything that can catch fire. Keep flammable materials away from the flame-effect fires by at least 10 feet. The bioethanol fuel should be stored in a place that is dry and secure so that children or pets cannot easily reach it.

Simple to use

A bioethanol fireplace is simple to install and has no flue to worry about. You only need a place to store it as well as fuel. Once you've filled the burner and lit it, ignite it. This will create an appearance of an actual flame. After the flame has been ignited it will heat the room but with very little or no smoke. It also produces heat similar to a fireplace that burns wood. They are also easy to maintain and don't require any servicing. Just a quick clean is all they need.

Unlike most rapid tests however, the BioFire RP2.1-EZ test employs an syndromic approach to detect common symptoms of infectious diseases and can return results in about 45 minutes. This test is suitable for patients suffering from upper respiratory symptoms and has a sensitivity rate of 98%. The test can detect up to 19 bacteria and viruses in one sample making it an excellent option for managing patients.

The BioFire platform integrates multiplex testing, sample preparation and results reporting into one platform. This allows laboratories to simplify their workflow and eliminate the need for a serial approach involving individual and send-out tests. This can lead to improved patient outcomes as the correct test is selected first time, and the need for expensive tests that are based on culture is eliminated. The BioFire system can identify pathogens on a cell level as well as their antimicrobial resistance gene. This information is more sensitive than the traditional methods.

Molecular diagnostics is becoming increasingly utilized to improve patient outcomes and treatment. The BioFire panel RP2.1+ utilizes an syndromic technique to simultaneously target 23 pathogens often implicated in respiratory illnesses. The assay can be run on the BioFire FilmArray 2.0 and Torch systems, and produces results in around 45 minutes.

This test is available in the US under FDA Emergency Use Authorization. It will be available commercially following the initial DoD requirements are met. The BioFire Defense team has also developed a fully automated sample-to result assay for rapid identification of COVID-19. The assay is currently being developed and will be available once initial DoD requirements are met.